Friday, November 9, 2012

Download Cisco IOS 12.4

I am really sorry for delay but its totally done. Please download document file first for information.

This is my collection of Cisco IOS for use with Dynamips.

The originals .bin files has been unzipped and renamed to .image, and recompressed with RAR to save disk space. Dynamips works better with an unzipped IOS,
the router boot faster. You need to decompress the file with WinRar, UnRar, 7Zip, etc, to obtain the .image file and store it in the image folder.

This compilation includes several IOS for PIX (IOS and ASDM) and special IOS called Pagent and Callgen.

Pagent is a set of data networking test tools, based on the Cisco IOS (Internetwork Operating System) and developed within Cisco. The test tools are included in special IOS
Pagent images.

Callgen is a set of Voice-Over-IP networking test tools, based on the Cisco IOS and developed within Cisco. The test tools are included in special IOS Callgen images.

The primary function of the Pagent and Callgen toolsets is to provide cost effective test tools to the Cisco testing community. The secondary function is to provide testing
capabilities that are not available anywhere else and can be used in customer environments. One essential function is to generate valid simulated traffic necessary for testing
networks under stress. The tools are not able to test the physical network layer and some parts of the data-link layer; that is, they can not affect frame checksums, preambles, inter
frame gap times, inject hardware failures, or transmit invalid packet sizes.

The Pagent programs are best used for testing layer 3 protocols and above; that is, emulating routing protocols, multicast, TCP sessions and HTTP sessions.

Pagent is an enhanced Cisco IOS image that contains both Advanced IP or IP Base Services and the IP traffic generation tools. Pagent generates realistic traffic and bottlenecks to
test QoS features such as IP Classification, IP Marking, and Queuing.

CallGen is a Cisco IOS-based bulk call generation tool implemented through extensions to the regular Cisco IOS image, which provides commands and utilities used to simulate
originating and terminating calls on routers and access servers.

The file "Patch for Dynamips.txt" contains the instructions for patch Dynamips (for use with Dynagen or GNS3) to use this IOS. In every folder, the TXT file includes the description of
all IOS: name, features and RAM memory in Mb.

Please download me first for check all versions and your requirement.

C1700 All Released Versions
C2600 All Released Versions
C2691 All Released Versions
C3620 All Released Versions
C3640 All Released Versions
C3660 All Released Versions
C3725 All Released Versions
C3745 All Released Versions
C7200 All Released Versions
CallGen All Released Versions
Pagent All Released Versions
PIX All Released Versions & Serials

61 comments:

  1. esta pagina no sirve!!!!!!!

    ReplyDelete
  2. i cant understand which ios i should download. there is XD 9-10-11-12 and then T 1-7-8 simple T. what is meant by this and which to download. plz any one help......

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Each IOS also has different features. ie, the c2691-entbase-mz.124-23.bin image does not have BGP. You need one of the "c2691-adventerprise-*.bin" images to get BGP. You'll also need to set your memory to 128D/32F for this image to work, as BGP is a huge mem-hog!

      Delete
  3. this is great,Thank you very muchif it were known out there that all we are interested in is learning cisco,then Cisco IOS images were to be readly available

    ReplyDelete
  4. This is very helpful. Thanks for putting it up online.

    ReplyDelete
  5. so thankful to the uploader and gns3 is amazing seriously good for people who cannot invest much

    ReplyDelete
  6. Thank you very much for putting this out there for us!

    ReplyDelete
  7. how can I emulate PC

    ReplyDelete
  8. This is great, it was hard for me to find IOS images....

    ReplyDelete
  9. Thank you very much.. Appreciated the efforts.

    ReplyDelete
  10. I need Cisco IOS for Router 7200 run ISIS, but I find not found. Every body can give for me in email: trancongsu@gmail.com

    Tks everybody.

    ReplyDelete
  11. so many choices here, anyone can suggest need download which one ?

    i tried download few, seem not working for me. can advice ?

    ReplyDelete
  12. for ccna labs which version ios i should use?

    ReplyDelete
  13. i'm studying for ccnp which ios should i have to download

    ReplyDelete
  14. Too many IOS version? visit the 2nd link below.

    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

    http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp


    Hope it helps!

    ReplyDelete
    Replies
    1. thanks for the 2nd link! helped a lot

      Delete
  15. thanks very much!

    ReplyDelete
  16. I have searched for long and i cannot find it anywhere else.. Thank you somuch for your help :)

    ReplyDelete
  17. You are a life saver!!!

    ReplyDelete
  18. thanks brother God bless you abundantly

    ReplyDelete
  19. thanks really help

    ReplyDelete
  20. Big thanks for IOS, I just started for CCNA and I do not know, which one, belong to Swtich and which one to Router, could u help me,

    ReplyDelete
  21. Any body has Juniper Router IOS. If have plz give it to me to my email. My email address is bhrank@yahoo.com

    ReplyDelete
  22. thanks alot man.. really very helpful !!!

    ReplyDelete
  23. Hi guys

    Any ios that supports voipv6? Please help!! Thanks.

    regards

    ReplyDelete
  24. Thanks Its Really Helpful
    downloaders if u dont have premium account at hotfiles go to cloud side of hotfiles and download first to pcloud then download from it to ur pc or lap
    https://my.pcloud.com/#page=register&invite=5nR7Zuir9N7

    ReplyDelete
  25. Do switches in gns3 need an iso because i cannot access the cli of them?

    ReplyDelete
    Replies
    1. Yes you can but you can't access full commands in gns 3. what you have to do just download 3600 series router IOS and select your hardware. (NW). It will allow you to have access CLI

      Delete
  26. Awesome work Sir !!!!! Can't be appreciated more!! just to good..congs..

    ReplyDelete
  27. is the juniper download really only 100meg? won't work for me. when i try and extract it gets to 13% and says file is broke.

    ReplyDelete
  28. hi guys please upload juniper ios

    ReplyDelete
  29. Hi Bilal,
    I am trying to download CISCO IOS. Any link I click it takes me to another website and I do not get any link to download bin file. could you please explain me.
    Thanks in advance

    ReplyDelete
  30. how do i download the ios images

    ReplyDelete
  31. which ios should i download for ccnp and how do i download them

    ReplyDelete
  32. HOT-FILE is DOWN ....
    Can someone reupload these images to another server?

    ReplyDelete
  33. Thank you very much...

    ReplyDelete
  34. Thank you very much for your kindness!

    ReplyDelete
  35. Thanks for the above! How do you load an IOS for the switches?

    ReplyDelete
  36. Thank you very much

    ReplyDelete
  37. Thanks so much for your updates ! this is very much useful for training purposes

    ReplyDelete
  38. thank you:-) jackpot for starters..

    ReplyDelete
  39. Thanks buddy... it really helped a lot for preparation of SP... :)

    ReplyDelete
  40. Simply great! Thanks a lot :)

    ReplyDelete
  41. Thanks you so much this is really helpful!!!

    ReplyDelete
  42. This collection is awesome! thank you so much author.

    ReplyDelete
  43. Thanks a lot very much appreciated all these

    ReplyDelete
  44. merci beaucoup pour votre aide!

    ReplyDelete
  45. Thank you so much!! Big Help!!!!!!

    ReplyDelete
  46. thanks mate i didnt know these existed

    ReplyDelete
  47. Thanks from New Zealand.

    ReplyDelete
  48. Thanks a lot!!! is a great page!!!

    ReplyDelete